After moving to China I ran into a few issues that got me to install a VPN. Namely:

• Latency. I frequently use SSH to access remote servers in US and EU and for some reason the latency here is terrible. Running SSH over a VPN seems to resolve this. A nice bonus is that idle sessions aren’t timed out (which they otherwise would with a little help of China’s Great Firewall.)
• Location aware websites. A number of websites will adjust their content based on your location. This is fine if you’re able to adjust it manually, but many of these websites don’t allow this as they are trying to restrict content to US and/or EU users. (Which just so happens to be the content I’m looking for.)
• Blocked websites. Although most websites that are blocked in China are not of particular interest to me, the GFW will occasionally put a ban on sites that I do like to use.

After using OpenVPN for a while I got mildly annoyed by:

• High CPU usage (99%) on Ubuntu systems after running it for extended periods of time.
• Not being able to use it on OS/X very easily or on my iPhone at all.

This made me switch to IPSec instead. IPSec requires a little more effort to configure but it has proven rock solid and cross-platform in several of my past projects. Having used Freeswan and Openswan before, I now decided to use Strongswan instead as it requires no kernel tweaks on Debian/Ubuntu making the installation a matter of minutes. (This is well documented on www.strongswan.org and I know you’re just here to read about the iPhone, so I won’t go into that now.

Making IPSec work with iPhone and OS/X’s native clients requires installing an L2TP daemon.

First the fairly standard Strongswan configuration:

/etc/ipsec.conf:

config setup
        # crlcheckinterval=600
        # strictcrlpolicy=yes
        # cachecrls=yes
        nat_traversal=yes
        charonstart=yes
        plutostart=yes
conn L2TP
        authby=psk
        pfs=no
        rekey=no
        type=tunnel
        esp=aes128-sha1
        ike=aes128-sha-modp1024
        left=your.ip.goes.here
        leftnexthop=%defaultroute
        leftprotoport=17/1701
        right=%any
        rightprotoport=17/%any
        rightsubnetwithin=0.0.0.0/0
        auto=add

/etc/ipsec.secrets:

your.ip.goes.here %any:     PSK "yoursharedkeygoeshere"

As you can see we’re enabling nat-traversal and transport mode at the same time. And that’s really the only ‘hack’ we need to do as it’s disabled by default.

On a Debian or Ubuntu system this should get you a long way:

apt-get install build-essential fakeroot dpkg-dev devscripts
apt-get source strongswan
apt-get install libcurl4-openssl-dev
apt-get build-dep strongswan
cd strongswan-4.2.4/
dch -i

Now edit debian/rules and change –disable-md5 –disable-sha1 –disable-sha2 to –disable-md5 –disable-sha1 –disable-sha2 –enable-nat-transport and continue:

dpkg-buildpackage -rfakeroot -uc -b
dpkg -i ../strongswan_4.2.4-5ubuntu2_i386.deb
/etc/init.d/ipsec restart

Alright. IPSec is good to go. Next the L2TP daemon for iPhone and OS/X:

apt-get install xl2tpd

/etc/xl2tpd/xl2tpd.conf:

[global]
debug network = yes
debug tunnel = yes
[lns default]
ip range = 10.0.0.200-10.0.0.254
local ip = 10.0.0.1
require chap = yes
refuse pap = yes
require authentication = yes
name = NIELSPEEN.COM
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes

10.0.0.0/24 is your local LAN. 10.0.0.200-10.0.0.254 are IP addresses that we can freely assign to the users. 10.0.0.1 is a free IP on your local LAN. (It should not be the IP bound to your LAN interface!)

Note: you don’t need an actual LAN to make this work. In fact, the server I use the above config on is not connected to one.

/etc/xl2tpd/l2tp-secrets:

*       *       l2tppassworduser1 *

/etc/ppp/options.xl2tpd:

ipcp-accept-local
ipcp-accept-remote
ms-dns you.dns.ip.here
noccp
auth
crtscts
idle 1800
mtu 1410
mru 1410
nodefaultroute
debug
lock
proxyarp
connect-delay 5000

Great! Now to configure your iPhone:

• Open the Settings app and navigate to General->Network->VPN->Add VPN Configuration…
• Make sure the selected VPN type is L2TP. (Not IPSec.)
• Fill in anything you like for Description.
• Server should be the hostname or IP of the machine you just installed Strongswan and xl2tpd on.
• Account is not checked by xl2tpd. You can give your users a random username.
• RSA SecurID is to be switched OFF.
• Password is the password as put in /etc/xl2tpd/l2tp-secrets.
• Secret is the PSK you’ve put into /etc/ipsec.secrets.
• Send All Traffic is typically turned on.

If, like me, you’re not using this to hook your iPhone to your office network, but want to use the connection to access the Internet, you’ll need to add a masquerading rule to iptables:

iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE

That’s it!

@kofai asked me to share my Fanfou to Twitter sync script. It’s not art, but it works, so here goes:

<?php
define(STATUS_PATH, '/home/www/twitbridg/status/');

include_once('password.php');
$since_id = file_get_contents(STATUS_PATH.$twitter_username.'.last') OR $since_id = '1';
// The twitter API address
$url = 'https://twitter.com/statuses/user_timeline/'.$twitter_username.'.xml?since_id='.$since_id;

$curl_handle = curl_init();
curl_setopt($curl_handle, CURLOPT_URL, "$url");
curl_setopt($curl_handle, CURLOPT_CONNECTTIMEOUT, 2);
curl_setopt($curl_handle, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($curl_handle, CURLOPT_GET, 1);
$buffer = curl_exec($curl_handle);
curl_close($curl_handle);

if (empty($buffer))
  die('failed to get tweets: '.$since_id."\n");
$xml = new SimpleXMLElement($buffer);
$i = sizeof($xml->status)-1;

if($i<0) exit;

while($i >= 0) {
// Update FanFou
$url = 'http://api.fanfou.com/statuses/update.xml';
$curl_handle = curl_init();
curl_setopt($curl_handle, CURLOPT_URL, "$url");
curl_setopt($curl_handle, CURLOPT_CONNECTTIMEOUT, 2);
curl_setopt($curl_handle, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($curl_handle, CURLOPT_POST, 1);
curl_setopt($curl_handle, CURLOPT_POSTFIELDS, "source=".urlencode("<a href=\"http://twitter.com/".$twitter_username."\">Twitter</a>")."&amp;status=".urlencode($xml->status[$i]->text));
curl_setopt($curl_handle, CURLOPT_USERPWD, "$fanfou_username:$fanfou_password");
$buffer = curl_exec($curl_handle);
curl_close($curl_handle);
$i--;
}
$last_id = $xml->status[0]->id;
$fp = fopen(STATUS_PATH.$twitter_username.'.last', 'w');
fwrite($fp, $last_id);
fclose($fp);
?>

As you can see it includes a password.php. This sets a few login variables. You can just insert them at the top of the above PHP file, but as I edit my code in public places I prefer not to do that.

<?php
$twitter_username = 'nielspeen';
$fanfou_username = 'nielspeen';
$fanfou_password = '123xyz';
?>

Enjoy!

AliPay is the Paypal of China and hard to ignore if you want to use websites like TaoBao (the Chinese eBay.) Unlike Paypal however, it requires ActiveX components or Firefox plugins to function. Getting this to work on Linux can be a pain if you don’t read Chinese. So here’s in English:

Download http://blog.alipay.com/wp-content/2008/10/aliedit.tar.gz

Extract it into /usr/lib/mozilla/plugins (as root) or into ~/.mozilla/plugins (if you care about the current user only.) Restart Firefox and things should work! (Select Tools, Add-ons, Plugins to verify that Aliedit has been installed.)

Plugins directory may vary on other distributions.